Turntable Preamp Can I hook up a turntable to an all in one modern stereo system through a aux cable?
If I wanted to hook up a turntable to a modern all in one stereo system, can I do it through an auxiliary cable? Also, if I could, would I need a preamp?
Yes you can but you will need a preamp unless there is one built in to your turntable. The audio signal coming from the turntable has to be processed before it will give you decent sound. You can hook it up without a preamp and see what it sounds like but I'm sure you'll be unhappy with the sound.
Converts Your Phono Signal to a Line Level Signal. Stateoftheart Phono Preamp To Accommodate Magnetic Pickups. Ultra LowNoise Audio Operational Amplifiers Offer Outstanding Sound Performance. Dedicated RCA and 1/4 Output Connectors. DC 12Volt Adapter Included. Connects to Turntable. Input Sensitivity: 3mV at 50K Ohms (phono). Output: 2V max (PP) at 10K Ohms. Includes power adapter 12V DC. THD: 0.08 1KHz and 3mV Input S/N Ratio: 70dB Frequency Response: 20Hz To 20KHz 2dB. Connects to Turntable Output to Bring Phono Level Up to Line Level 12V DC 110V Adaptor Included. Dimensions: (W)3.54 x (H)2.13 x (D)1.02 Weight: 0.88 Lbs. Input Sensitivity/Impedance/PHONO 3 mV / 50K Ohms T.H.D: 0.08 for 1 KHz 3 MV Input Output Level: 2V. Load Impedance: 10K Ohms Reference Voltage: 1V d. S/N Ratio (AWTD): 70 dB Frequency Response: 20 Hz 20 KHz plusmn;2dB
A combination RIAA phono-turntable preamp and direct box that allows long-play vinyl albums to be played directly through a professional microphone preamp or mixing console where the very highest quality is required. This audiophile interface is ideally suited for album archiving, pristine sampling, recording performances, and DJ mixing. It has RCA inputs; stereo RCA, 3.5mm, and 1/4" TRS -10dB line-level outputs; and balanced mic-level XLR outs. Employs an indestructible steel housing with internal I-beam construction, a protective zone around switches and jacks, and a full-bottom no-slip pad. May be powered with 48V phantom or DC supply. An auto sensor automatically selects whichever power supply is present.RIAA phono-turntable preamp and direct boxRCA inputsXLR, RCA, 3.5mm, and TRS line-level outsSteel housingSwitch and jack protectionNo-slip padPowered with 48V phantom or DC supply
The BBE FJB-200X Phono Preamp converts an RIAA turntable signal into line level so you can play your vinyl straight through your stereo, mixer, or computer sound card. The BBE preamp has stereo RCA I/O, 1/4" TRS out, and a grounding post for 60-cycle hum elimination. Works with magnetic phono cartridges.Preamp converts RIAA turntable signal into line levelStereo RCA I/O1/4" TRS outGrounding postWorks with magnetic phono cartridges
The BBE FJB-200X Phono Preamp converts an RIAA turntable signal into line level so you can play your vinyl straight through your stereo, mixer, or computer sound card. The BBE preamp has stereo RCA I/O, 1/4" TRS out, and a grounding post for 60-cycle hum elimination. Works with magnetic phono cartridges.Preamp converts RIAA turntable signal into line levelStereo RCA I/O1/4" TRS outGrounding postWorks with magnetic phono cartridges
For die-hard vinyl fans, the fully automatic PSLX250H turntable makes it a breeze to bring the old 33-1/3 and 45 record collection back into your music rotation. Convenient front-mounted controls and a built-in phono preamp simplify operation. From Sony.
In the age of the MP3, it can be easy to forget that a turntable signal needs a little help before it reaches a mixer or home stereo if it's going to be heard. Thanks to the Behringer MicroPHONO PP400 phono preamp, your turntable will get the boost it needs to bring your vinyl to life.
The Microphono PP400 is a small preamp from Behringer that boosts the signal from your turntable to a line level suitable for sending to a mixer, computer, speakers, or other equipment. Features dedicated RCA and 1/4" outputs and RCA inputs.Converts your phono signal to a line level signalState-of-the-art phono preamp to accommodate magnetic pickupsUltra low-noise audio operational amplifiers offer outstandingperformanceDedicated RCA and 1/4" output connectorsDC 12-Volt adapter includedHigh-quality components and exceptionally rugged construction ensure long life
The Microphono PP400 is a small preamp from Behringer that boosts the signal from your turntable to a line level suitable for sending to a mixer, computer, speakers, or other equipment. Features dedicated RCA and 1/4" outputs and RCA inputs.Converts your phono signal to a line level signalState-of-the-art phono preamp to accommodate magnetic pickupsUltra low-noise audio operational amplifiers offer outstandingperformanceDedicated RCA and 1/4" output connectorsDC 12-Volt adapter includedHigh-quality components and exceptionally rugged construction ensure long life
Break out your old Freddie Mercury LP's or 80s Punk Rock 7 inches and rediscover what you love about vinyl. The Audio Technica ATLP60 has switchable 33-1/3 and 45 RPM speeds to accommodate the vast majority of records out there. An affordable, fully automatic belt-drive workhorse, the ATLP60 has a built-in switchable phono preamp so it can be connected directly to your computer, home stereo or even to other components that have no dedicated turntable input. The turntable is supplied with an integral Audio-Technica Dual Magnet phono cartridge with replaceable ATN3600L stylus. Audio Technica ATLP60 Features Fully automatic operation with two speeds: 33-1/3 and 45 RPM Professional, belt drive, aluminum platter Included cables connect to your stereo or powered speakers Integral Dual Magnet phono cartridge with replaceable stylus Switchable built-in pre-amplifier with line-level RCA output cables
Designed for connecting a turntable to any mixer or line level audio input, the Rolls VP29 provides the preamp and RIAA EQ to boost and properly contour the turntable’s audio signal. Perfect for doing vinyl to CD transfers and burning custom compilation CDs in the studio. Stereo RCA inputs and outputs, 1/4' TRS output, grounding post. AC adapter supplied. Features Converts RIAA Phono signals to Line Level Works well with magnetic phono pickups Stereo RCA and 1/4' outputs