Tube Turntable
![]() |
![]() |
YAQIN MS-22B Tube Phono Stage pre amplifier turntable PUS | ![]() |
![]() |
US $175.00 | 10d 20h 12m |
![]() |
YAQIN MS-12B MM Vacuum Tube Pre-Amplifier / RIAA for turntable PUS | ![]() |
![]() |
US $255.00 | 10d 20h 13m |
![]() |
Out Of Tube Console Glaser Steers 3000 turntable functioning Record Player | ![]() |
![]() |
US $136.90 | 19d 14h 58m |
![]() |
Dynavox 112 sll self contnd tube 2 speaker 4 78 speed record player TURNTABLE | ![]() |
![]() |
US $27.77 | 13d 14h 16m |
![]() |
Pyon Spira Isolation Feet tube ss amp CD LP turntable | ![]() |
![]() |
US $895.00 | 5d 4h 44m |
![]() |
VINTAGE DUAL STEREO RECORD PLAYER AUTO RETURN TURNTABLE FOR TUBE AMP AMPLIFIER | ![]() |
0 Bid | US $40.00 | 5h 53m |
![]() |
YAQIN MS-22B Stereo Tube Phono Stage pre-amp turntable | ![]() |
![]() |
US $150.00 | 4d 18h 35m |
![]() |
YAQIN MS-22B Tube Phono Stage pre amplifier turntable | ![]() |
![]() |
US $219.00 | 16h 20m |
| Powered by phpBay Pro |
![]() |
No items matching your keywords were found.
Tube Turntable

integrated tube amps... how can i pick a winner?
im looking at a two channel setup with a turntable and an integrated amp. I dont know how to choose the right integrated amp. solid state sound easy and potentially cheaper. i hear tube sounds better but degrades over time and needs to have tubes replaced. im looking at around 500-700 for the amp almost definitly from audiogon.com as their really isnt much other choice for vintage gear. can anyone clear this up for me?
I would personally stay away from vintage gear, unless you're willing to pay extra to have it gone over by someone when you get it and periodically after... and can actually find someone who will do it and do it well. People who claim gear has been "restored" are often full of it. While these old electronics were built much better than anything is today, they don't last forever and usually require some work to get them sounding good and performing to spec and their rated power output.
Jolida makes some really nice sounding tube gear you can buy brand new in that price-range (no built-in phono stages though). That's probably where I'd start looking. The build quality is very decent too, good quality capacitors (not "audiophile", but longer lasting than the types generally used in consumer electronics), ceramic tube sockets, etc... Finding something that presents sound in a way that appeals to you personally is the most important thing. I would definitely try to listen to any audio gear before purchasing.
http://www.uptownaudio.com/jolida/JolidaStore.htm
Small preamp tubes last quite awhile. Power tubes, maybe a few years. There are many low-cost current production tubes available I think sound very nice. Tube cost shouldn't be a problem.
Something like a Harman Kardon stereo receiver probably wouldn't be a bad way to go either. They're powerful, warm sounding and have a phono input. Almost as good as tubes or anything labled "budget audiophile" for much less money. I've been seeing refurbs going for good prices on eBAY direct from Harman Audio with warranty. I'm not crazy about their home theater receivers because their video switching is notoriously "buggy". But, many agree they do sound excellent as do their stereo receivers.
http://shop.ebay.com/harmanaudio/m.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A2971&_ipg=&_trksid=p3911.c0.m14&_pgn=1
Looks like they've changed their strategy a bit and they're now listing some very high "buy it now or best offer" prices. An offer of less than half the "buy it now" price would probably score you one of these.
![]() |
![]() |
YAQIN MS-22B Tube Phono Stage pre amplifier turntable PUS | ![]() |
![]() |
US $175.00 | 10d 20h 12m |
![]() |
YAQIN MS-12B MM Vacuum Tube Pre-Amplifier / RIAA for turntable PUS | ![]() |
![]() |
US $255.00 | 10d 20h 13m |
![]() |
Out Of Tube Console Glaser Steers 3000 turntable functioning Record Player | ![]() |
![]() |
US $136.90 | 19d 14h 58m |
![]() |
Dynavox 112 sll self contnd tube 2 speaker 4 78 speed record player TURNTABLE | ![]() |
![]() |
US $27.77 | 13d 14h 16m |
![]() |
Pyon Spira Isolation Feet tube ss amp CD LP turntable | ![]() |
![]() |
US $895.00 | 5d 4h 44m |
![]() |
VINTAGE DUAL STEREO RECORD PLAYER AUTO RETURN TURNTABLE FOR TUBE AMP AMPLIFIER | ![]() |
0 Bid | US $40.00 | 5h 53m |
![]() |
YAQIN MS-22B Stereo Tube Phono Stage pre-amp turntable | ![]() |
![]() |
US $150.00 | 4d 18h 35m |
![]() |
YAQIN MS-22B Tube Phono Stage pre amplifier turntable | ![]() |
![]() |
US $219.00 | 16h 20m |
| Powered by phpBay Pro |
![]() |
No items matching your keywords were found.
![]() |
![]() |
PHILCO PORTABLE VINTAGE TUBE TURNTABLE 1950s JETSONS ATOMIC AQUA BLUE CASE | ![]() |
![]() |
US $149.99 | 29d 21h 8m |
![]() |
VINTAGE DECCA TUBE RECORD PLAYER MODEL DP-590 TURNTABLE 4 SPEED PARTS REPAIR | ![]() |
![]() |
US $74.25 | 24d 14h 36m |
![]() |
You BUILD an FM Phonograph Pickup Arm & Tube Turntable! | ![]() |
![]() |
US $30.00 | 27d 8h 8m |
![]() |
Vintage Wooden Emerson Phonoradio Phonograph Tube Radio Turntable Record Player | ![]() |
![]() |
US $75.00 | 26d 12h 16m |
![]() |
GE Tube Turntable RP 2113A Dualaramic Stereo Needs TLC | ![]() |
![]() |
US $72.00 | 9d 13h 16m |
![]() |
WEBCOR Musicale Model 333-1 Tube Turntable | ![]() |
![]() |
US $399.99 | 13d 13h 14m |
![]() |
PHILCO Model 50-1424 Tube Radio / Turntable | ![]() |
![]() |
US $399.99 | 13d 12h 56m |
![]() |
Magnavox Imperial Micromatic S600 tube console turntable NICE | ![]() |
1 Bid | US $24.95 | 12h 16m |
![]() |
ZENITH COBRA MATIC TURNTABLE RECORD PLAYER AM RADIO TUBE POWERED | ![]() |
0 Bid | US $199.95 | 1d 13h 32m |
![]() |
BOGEN PRESTO VP 40A TURNTABLE TUBE AMP STEREO SYSTEM LENCO GOLDRING | ![]() |
![]() |
US $199.00 | 4d 6h 14m |
| Powered by phpBay Pro |
![]() |
![]() |
Vintage Silvertone Record Player Turntable Stereo Silver Tone Tube ? | ![]() |
1 Bid | US $9.99 | 3d 12h 1m |
![]() |
Vintage Philco 48-1253 Tube Radio Phonograph Turntable Record Player Antique | ![]() |
0 Bid | US $.99 | 6d 8h 47m |
| Powered by phpBay Pro |
|
|
Turntable Matinee $10.49 Turntable Matinee |
|
|
Turntable Technology $9.49 Turntable Technology |
|
|
Train Turntable $24.99 Train Turntable - Photographic Print |
|
|
Railway Turntable $24.99 Railway Turntable - Photographic Print |
|
|
Turntable, Retro $24.99 Turntable, Retro - Premium Poster |
|
|
Turntable Line $24.99 Turntable Line - Photographic Print |
|
|
Merryweather Turntable $39.99 Merryweather Turntable - Giclee Print |
|
|
Professional Manual Turntable $73.94 PYLE TURNTABLE |
|
|
Ortofon Pro Concorde Turntable Cartridge Twin Pack $203.99 The Ortofon Pro Concorde is a general purpose turntable cartridge for scratch and back cueing, mounted with a spherical diamond. It achieves an output of 5.0 mV.Several Ortofon technologies make it possible to realize high sound quality and low record wear at the high tracking forces that are necessary in disco environments. DJs all over the world claim very high demands to their professional DJ equipment, among which the cartridges plays their decisive part by realizing that scratching, back-cueing, and live artistic performance are a big part of the show. Reliability and robustness is vital, when these replacement cartridges night after night will have to withstand these demands in environments with extreme sound pressure and vibration.Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon Pro Concorde cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the turntable cartridge nor degrade its stability.For easier cueing, the nose of all the Ortofon replacement cartridges have an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent.2 Pro Concorde turntable cartridges |
|
|
Ortofon Scratch Twin Pack Turntable Cartridge $234.99 The Ortofon Scratch was designed together with DJ's for scratch and back cueing. The rubber suspension is especially developed for scratch and back cueing. This turntable cartridge uses a spherical diamond and achieves a high output (7.0 mV).Several Ortofon technologies make it possible to realize high sound quality and low record wear at the high tracking forces that are necessary in disco environments. DJ's all over the world claim very high demands to their DJ professional equipment, among which the cartridges plays their decisive part by realizing that scratching, back-cueing, and live artistic performance are a big part of the show. Reliability and robustness is vital, when these replacement cartridges night after night will have to withstand these demands in environments with extreme sound pressure and vibration.Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the Ortofon cartridge nor degrade its stability.For easier cueing, the nose of all the Ortofon cartridges have an extra large cutout which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent.2 Ortofon Scratch turntable cartridges |
|
|
Ortofon Elecktro Concorde Twin Pack Turntable Cartridge $224.99 The Ortofon Elecktro Concorde turntable cartridge was designed in close relationship with DJs. The rubber suspension is especially developed for scratch and back cueing. It uses a spherical diamond and projects a high output (7.5 mV).Several Ortofon technologies make it possible to get high sound quality and low record wear at the high tracking forces that are necessary in disco environments. DJ's all over the world claim very high demands to their professional DJ equipment, among which the Ortofon cartridges plays their decisive part by realizing that scratching, back-cueing, and live artistic performance are a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme sound pressure and vibration.Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage these replacement cartridges nor degrade their stability.For easier cueing, the nose of all the Ortofon cartridges have an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent.2 Ortofon Electro Concorde turntable cartridges |
| Account limit of 2104 requests per hour exceeded. |
1958 Magnavox "Imperial" Tube-type Radio-Phono
midi controller scratching?
im thinking about buying a midi controller so i wanted to c it n action so went on you tube and seen that every video that i looked at they were just doing the transformer scratch i was wondering if u can do other tricks on it with out n e trouble like drops tears and chirps on it u know just like real turntables ????? and all the ones the i seen the jog wheels dont spin it would b better if u can help me to check 1 out that spins thanks
Build one
http://www.midibox.org/dokuwiki/scratchcontroller
There are DJ Raseri's instructions.
end of line






















