Stabilizer ClAmp
March 4th, 2008
 |
 |
LP Record Clamp Audio Disc Stabilizer Turntable |  |
 |
US $23.99 | 13d 16h 35m |
 |
LP Record Clamp Audio Disc Stabilizer Turntable / Black | |
|
US $39.99 | 18d 7h 58m |
 |
3 in 1 Record Clamp LP Audio Disc Stabilizer Turntable | |
|
US $39.00 | 24d 8h 42m |
 |
Jinsun Iris Stabilizer, Record Clamp, New Production | |
|
US $450.00 | 22d 9h 13m |
 |
3 In 1 Record Clamp LP Audio Disc Stabilizer Turntable | |
|
US $63.90 | 9d 13h 50m |
| Powered by phpBay Pro |
|
 |
HIFI LP Record Disc turntable stabilizer ring USB clamp | |
|
US $25.00 | 21d 8h 3m |
 |
LP Record Clamp Audio Disc Stabilizer Turntable / Black | |
|
US $23.99 | 9d 19h 28m |
 |
5x HIFI LP Record Disc turntable stabilizer ring clamp | |
|
US $110.00 | 21d 11h 44m |
| Powered by phpBay Pro |
Stabilizer ClAmp
Fronk fork shimmy after wrecking and rebuilding front end. Is this dangerous? Whats the problem?
I recently dropped my 1984 Honda Magna at high speed bending one of the forks and shattering the fork stabilizer. I replaced both of the fork tubes and the stabilizer. I a now noticing a front end shimmy when decelerating or after hitting a bump. I believe my triple tree may be slightly bent do to the fact that I had to pull one of the forks back about 1/8" to hit the clamp. I am mostly wondering if this situation is dangerous. Also is the triple tree the problem or is it something else? The brakes are not dragging, forks exhibit equal play, and wheel seems to spin without any wobble. I would apreciate any help.
It is definitely dangerous. Any shimmy can cause you to lose control and crash. You may want a mechanic to check it out to find what is wrong with it. Could be triple trees, wheel bearings, bent frame, steering bearings to name a few possibilities that come to mind.
|
|
LP Record Clamp Audio Disc Stabilizer Turntable | |
|
US $23.99 | 13d 16h 35m |
|
LP Record Clamp Audio Disc Stabilizer Turntable / Black | |
|
US $39.99 | 18d 7h 58m |
|
3 in 1 Record Clamp LP Audio Disc Stabilizer Turntable | |
|
US $39.00 | 24d 8h 42m |
|
Jinsun Iris Stabilizer, Record Clamp, New Production | |
|
US $450.00 | 22d 9h 13m |
|
3 In 1 Record Clamp LP Audio Disc Stabilizer Turntable | |
|
US $63.90 | 9d 13h 50m |
| Powered by phpBay Pro |
|
|
HIFI LP Record Disc turntable stabilizer ring USB clamp | |
|
US $25.00 | 21d 8h 3m |
|
LP Record Clamp Audio Disc Stabilizer Turntable / Black | |
|
US $23.99 | 9d 19h 28m |
|
5x HIFI LP Record Disc turntable stabilizer ring clamp | |
|
US $110.00 | 21d 11h 44m |
| Powered by phpBay Pro |
|
|
Jinsun Iris Stabilizer, Record Clamp, New Production | |
|
US $450.00 | 22d 9h 13m |
 |
VTG J.A. Michell Engineering LTD England LP RECORD PLAYER CLAMP Stabilizer Puck | |
|
US $129.99 | 10d 17h |
| Powered by phpBay Pro |
|
No items matching your keywords were found.
|
|
FASTWAY STEERING STABILIZER FRAME CLAMP $69.99 Steering stabilizer frame clamp |
|
|
Gibraltar Stabilizer Platform $39.6 Gibraltar Stabilizer Platform Gibraltar Stabilizer Platform Description: SC-4429 Stabilizer Platform 3 Hole Platform Mount Three-way clamp accepts 1/2" through1" dia tubes. Get your Gibraltar Stabilizer Platform today! |
|
|
Stabilizer $6 Stabilizer |
|
|
Stabilizer $2.8 Stabilizer |
|
|
Front Stabilizer Bar Bushing Clamp by Crown Automotive for Jeep $4.99 1987-95 Jeep YJ Wrangler;Black rubber;Sold individually JEEP WRANGLER (87-95YJ) ISLANDER LAREDO RENEGADE RIO GRANDE S SAHARA SE SPORT 1987 1988 1989 1990 1991 1992 1993 1994 1995 2.5L (150) 4.2L (258) 4L Power Tech (242) GAS Front Stabilizer Bar Bushing Clamp by Crown Automotive for Jeep |
|
|
Clamp - $14.99 Clamp - |
|
|
Front Stabilizer Bar Bushing Clamp by Crown Automotive $4.99 1987-95 YJ Wrangler;Black rubber;Sold individually |
|
|
FASTWAY STEERING STABILIZER UNDER-BAR MOUNT KIT FOR KTM MACHINED TRIPLE CLAMP $112.99 Steering stabilizer under-bar mount for KTM machined triple clampIncludes stabilizer mount, bar mounts and hardwareRaises handlebars 1" to 1-1/2" depending on application |
|
|
FASTWAY STEERING STABILIZER UNDER-BAR MOUNT KIT FOR KTM CAST TRIPLE CLAMP $112.99 Steering stabilizer under-bar mount for KTM cast triple clampIncludes stabilizer mount, bar mounts and hardwareRaises handlebars 1" to 1-1/2" depending on application |
|
|
FASTWAY STEERING STABILIZER UNDER-BAR MOUNT KIT FOR KTM MACHINED TRIPLE CLAMP (USE WITH STOCK BAR MOUNTS) $51.99 Steering stabilizer under-bar mount for KTM machined triple clampIncludes stabilizer mount and hardwareRe-uses stock bar mountsRaises handlebars 1" to 1-1/2" depending on application |
|
|
7140 Rear Stabilizer bar $7.52 Stabilizer |
|
|
GPR V4 Fat Bar Stabilizer Kit Black $459.99 The GPR V4 Stabilizer is a great tool to enhance winning championships on the track or off-road. With the unparalleled under bar design, the slim V4 Stabilizer will not increase the height of your bars substantially. With its fully adjustable, easy to use red dial you can make quick adjustments on the fly. The GPR V4 stabilizer is designed to be tucked away under the bars and is still easily adjustable without raising the handle bars too high. Kit includes damper, bolt on post mount, below the bar mounting system, and complete instructions. Only raises bars an average of 3/8 . Will only work with Fat Bar style (1 1/8 clamp area) handlebars and stock triple clamp. |
 |
E.C. Kraus Hose Clamp: Stainless-Steel / 1/8" - 1/2"
Sale Price: $0.85  |
|
E.C. Kraus Hose Clamp: Stainless-Steel / 1/8" - 1/2"
|
 |
Fastcap 3HANDCPACK 3rd Hand Contractor Poles, 4-Pack
List Price: |
 |
Werner AC10-20-02 Long Body Aluminum Ladder Jacks for Stages up to 20-Inch Width (Pair)
List Price: |
 |
Lamp Shade Adapter Clips Onto Standard Bulbs (Lot of 10)
Sale Price: $10.50 |
 |
StowAway Hitch Tightener
Sale Price: $23.95 |
 |
Boone Outdoor aka The Wedge No Rattle Hitch Stabilizer
Sale Price: $7.57 |
 |
CG-Lock CG001 Seatbelt Stabilizer
Sale Price: $49.95 |
 |
GoPro Handlebar Seatpost Mount for HERO Cameras
Sale Price: $19.99 |
 |
iStabilizer Mount Smartphone Tripod Mount
List Price: |
 |
Panavise 809 Camera Window Suction-Cup Mount
List Price: |
 |
Suretrack
List Price: |
 |
Delta Stableloader 2-Bike Truck Bed Mount Rack
List Price: |
Monopod/Stabilizer v2.0
Biscuit Joinery and Pocket-hole Technology for Woodworking Enthusiasts
When building cabinets, furniture and other such woodworking projects, the best joining method to use can be a looming question. Craftsmen strive for the strongest, most durable and smooth joints possible, and to achieve this - craftsmen strive also, for the best joinery technique. There are many methods of quality wood joinery, some of the most popular methods being biscuit (or plate) joinery, and pocket-hole joinery. Biscuit joinery and pocket-hole technology each provide exceptionally strong joints in a simple, reliable process. Each of these techniques offer a different set of features that fasten joints in different and effective ways.
Biscuit or plate joinery involves the insertion of a biscuit into an oval, or crescent shaped slot that is cut into opposite edges of two pieces of wood. Biscuits are pre-cut, oval-shaped pieces of compressed wood that range in size from 1/2in to 2-1/4in in length. There are also biscuits available in plastic, aluminum, and steel for special applications, generally however, wood biscuits are the most prominently used. Biscuits (dabbed with glue) are inserted into specially cut slots in the wood that are shaped identically to the biscuit, the two pieces of wood are clamped together to set, and thus form a strong, durable joint. The biscuits also tend to soak up the glue applied to them before insertion which causes them to swell and make the joint tighter, and stronger. Porter Cable, DEWALT, and Makita each offer high quality plate joiners with unique, and individual features to help meet your needs, and build your joints better.
Porter Cable offers a Deluxe Plate Joiner Kit with a powerful 7.5 amps and 10,000 rpm. This joiner has many features that simplify the joining process, including: a precise micro height-adjustment knob to keep biscuits exactly centered, and a 1in O.D. (outer diameter) dust port that works with standard bags or can simply hook up to a vacuum. The DW682K has a fence tilt of 0 to135 degrees with a positive adjustable stop at 90 degrees; and, for increased cutting control and stability, the bale handle is attached to the fence rather than the motor. The joiner also has a lock-on trigger for continual use and a supremely accurate (at any angle) hight scale to precisely measure positions. Porter Cable's plate joiner has seven-position rotating depth stop to accommodate a variety of biscuit sizes and depths, and a spindle lock mechanism for simple blade changes. For standard and face-frame biscuits, Porter Cable's Deluxe Plate Joiner Kit includes both 2in and 4in diameter blades. The kit also includes a centering plate, dust bag, a chip deflector, allen wrench, and a carrying case for portability and convenience.
DEWALT offers a similar Heavy-Duty Plate Joiner with 6.5 amps and no load speed of 10,000 rpm; tough enough to work through even the hardest wood. To ensure the most accurate joints, the DW682K features a dual rack and pinion system that keeps the blade and fence always parallel as you work - every time. The one piece fence is also adjustable with a 0-90 degree tilt, and, at zero degrees, a flush cut can be made without removing the fence. Additionally, the fence has a locating notch at 45 degrees that allows indexing off the outside surface of a mitered joint: in other words, the fence has a positive lock at 45 degrees to keep your joints always accurate. The joiner, having a no mar, heavy-duty aluminum shoe, can be clamped down to work surfaces for stationary work - and has retractable, anti-slip pins to help hold your work in place, and preset depth stops for all common biscuit sizes. DEWALT's joiner kit comes with a carbide blade, dust bag, a vacuum adapter, Torx key, wrench, and a heavy-duty kit box for security. The DW682K comes with DEWALT's one year free service contract, and a three year limited warranty.
Makita also provides an excellent option in biscuit joinery. Their 3901 plate joiner runs on 5.6 amps, and with a no load speed of 10,000 rpm. Although with slightly less amps, the tool is strong enough to make the tight, and lasting joints craftsmen expect from biscuit joinery. Makita's joiner has a one-touch 6 depth setting that allows for immediate depth change when working, and accommodates most common biscuit sizes. Makita's 3901 also features a shaft lock for fast, simple blade changes, and easy to operate cam locks for added security. With a cast aluminum pivot fence with positive stops at 0, 45, and 90 degrees the joiner is always accurate and precise, and is designed to quickly and simply make strong and durable plate joints. The tool has a maximum cut depth of 25/32in, a large top grip handle, no mar rubber strip insert, and is double insulated for additional security/safety on the job. Makita's 3901 plate joiner includes a carbide tipped blade (4in in diameter), an angle guide, dust bag, lock nut wrench, set plate, inner flange, lock nut, and a plastic tool case for convenience and portability. The tool is just over a foot long and weighs 6.2 lbs.
Pocket-hole technology involves drilling an angled hole into one workpiece and joining it to another with a self-tapping screw. This process eliminates tedious drilling applications, and provides a fast, strong joint in which the screw acts as a permanent internal clamp pulling and holding two workpieces together. Kreg offers a Jig Master System specifically designed for pocket-hole joinery. The K3MS is effectively two tools in one having interchangeable drill guide blocks that can shift between benchtop and portable bases. The tool has an easy access, spring-loaded, front-side clamp that eliminates reaching around big panels to get to your toggle clamps; it keeps everything within arms reach so you can maintain speed and greater ease on the job.
To help you perfectly place your pocket-holes in a variety of widths and thicknesses Kreg offers a three-hole drill guide with a hardened steel core. This steel core also protects bits by keeping them completely covered, and supports work pieces throughout the entire drilling process. This technology reduces bit deflection and tear-out, and provides a clean, smooth, and pluggable pocket-hole. Kreg's jig also has a material support stop that can be set at any distance from the jig enabling you to repeat the same pocket-hole numerous times. This stop can also swing or flip out of the way to act also as a height support for large panels. Additionally, Kreg utilizes an optimized drilling angle specifically configured to enhance driving efficiency and reduce the pocket-hole's overall size to less than 1-1/2in. A wood-chip relief system -which consists of one wood-chip relief hole per every drill guide hole - keeps messy debris out of your drill bits and decreases drill torque output, thus increasing the life of your drill bits. With this system you can create an smooth pocket-hole in one plunge. Kreg jigs are built with an unique composite material that is flexible, resilient and also strong and durable; each jig is also built in-part with heavy-duty glass-reinforced nylon that maintains its strength and longevity.
Each of these joinery options is unique and provides professional results and professional strength to your joints. Both biscuit joinery, and pocket-hole joinery offer simple and strong solutions to achieving the perfect woodworking joint.
About the Author
As a student at the University of Utah, Mallory Kramer is currently earning an Englinsh degree. Three years ago she joined M&M Tool adding to their over 150 years combined experience; there, she specializes in tool parts and web communications. For over 60 years M&M Tool has provided professional service to the tool industry with parts, sales, and service to professionl level woodworking products, tools, and machinery.
Posted in 
Tags: