Qsc Plx
March 10th, 2008
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Qsc Plx
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
|
Used Qsc Plx 3402 $649.99 In Store Used USED QSC PLX 3402 |
|
|
QSC Amplifier BSC-3 $45 QSC Amplifier BSC-3 Accommodates one signal processor (crossover, limiter or EQ) for PLX, CX and DCA amplifiers. XF-1 input transformers may also be added. Get Your QSC Amplifier BSC-3 Today! |
|
|
QSC Amplifier XF-1 $60 QSC Amplifier XF-1 The XF-1 is an internally mounted, high-quality, high-bandwidth input isolation transformer accessory for QSC amplifiers. Custom made for QSC by Jensen, it provides superb common-mode noise rejection for high-performance sound systems. The XF-1 kit includes the transformer and parts necessary to provide balancing and isolation for one amplifier input. The accessory is compatible with PLX, DCA, and CX models fitted with an internal BusCard. It is also directly compatible with MXa, EX, and various legacy CX models. Get Your QSC Amplifier XF-1 Today! |
|
|
QSC Amplifier OT-300a $90 QSC Amplifier OT-300a The OT-300a is a heavy-duty step-up autoformer accessory that adapts any power amplifier output with a maximum voltage of approximately 17 to 35 volts to drive a 70-volt distributed line with up to 300 watts. Four voltage taps let you choose the one most appropriate for the amplifier. Conversely, the OT-300a can be used as a high-power speaker transformer, driving loudspeakers with up to 300 watts from a 70-volt distributed line. The OT-300a autoformer is compatible with any amplifier rated at up to approximately 350 watts at 4 ohms. It has built-on brackets for convenient mounting on a panel or in an equipment rack. Compatible Amplifier Models: USA 400 RMX 850 MX 700 PLX 1202 PowerLight 1.0 CX 302 and CX 254 DCA 1222 and DCA 1824 Any amplifier rated at approximately 70 to 350 watts at 4 ohms Get Your QSC Amplifier OT-300a Today! |
|
|
QSC Amplifier OT-600 $130 QSC Amplifier OT-600 The OT-600 is a heavy-duty step-up autoformer accessory that adapts any power amplifier output with a maximum voltage of approximately 40 to 50 volts to drive a 70-volt distributed line with up to 600 watts. Three voltage taps let you choose the one most appropriate for the amplifier. The OT-600 can also be used to drive a 100-volt line when used with an amplifier with a maximum output level of 55 to 70 volts. Conversely, the OT-600 can be used as a high-power speaker transformer,driving loudspeakers with up to 600 watts from a 70-volt distributed line. The OT-600 autoformer is compatible with any amplifier rated at approximately 350 to 650 watts at 4 ohms. It has built-on brackets for convenient mounting on a panel or in an equipment rack. Compatible Amplifier Models: USA 900 and USA 1310 RMX 1450 MX 1500a and MX 2000a PLX 1602 PowerLight 1.0HV, PowerLight 1.4, and PowerLight 1.8 CX 502 and CX 404 DCA 1622 and DCA 1644 Any amplifier rated at approximately 350 to 650 watts at 4 ohms Get Your QSC Amplifier OT-600 Today! |
|
|
QSC PLX2 Amplifiers PLX-1802 $899 QSC PLX2 Amplifiers PLX-1802 The QSC PLX-1802 is a rackmount stereo power amplifier, offering up 330W per channel at 8 Ohms, and weighing in at a mere 21 pounds. The unit is designed to drive up to 4 loudspeakers from each amplifier channel (2 Ohm loading), or when high power bridge mono operation is required, and offers a comprehensive feature set with uncompromised PLX performance and technology. The PLX-1802 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status, and is a worthy solution for either high-quality portable P.A. amplification use, or in a studio situation as a reference playback alternative. Features: Lightweight, high-output stereo rackmount power amplifier with Stereo, Parallel and Bridged Mono operation and indicators 21-position front-panel gain controls for precise, repeatable amplifier adjustment Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overload conditions Front panel LED power, clip, -10dB, and signal present indicators for system monitoring and troubleshooting Balanced XLR inputs with parallel TRS connectors and loop-through support Speakon NL-4 output connectors with positive-locking speaker connection; Ch. 1 output uses all 4 wires for single-cable connection to bi-amplified speakers Get Your QSC PLX2 Amplifiers PLX-1802 Today! |
|
|
QSC PLX2 Amplifiers PLX1104 $699 QSC PLX2 Amplifiers PLX1104 The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. The compact PLX1104 is for applications that don't require briged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds these "plug-and-play" amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback. PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 pounds of the most advanced professional power amp on the planet. PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 60 energy pulses per second. The PowerLight supply delivers 100,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean. PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality. Power Output: 8 ohms, stereo: 325W 4 ohms, stereo: 550W Features: Very light weight (13 lbs/5.9 kg) Cooling design exhausts hot air out the front,keeping the rack cool. Flow-through heat sinks require no filters that couldbecome clogged Front pan |
|
|
QSC PLX2 Amplifiers PLX1804 $799 QSC PLX2 Amplifiers PLX1804 The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. The compact PLX1804 is for applications that don't require briged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds these "plug-and-play" amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback. PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 pounds of the most advanced professional power amp on the planet. PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 60 energy pulses per second. The PowerLight supply delivers 100,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean. PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality. Power Output: 8 ohms, stereo: 600W 4 ohms, stereo: 900W PLX1804 Features: Very light weight (13 lbs/5.9 kg) Cooling design exhausts hot air out the front,keeping the rack cool. Flow-through heat sinks require no filters that couldbecome clogged Fr |
|
|
QSC PLX1104 Lightweight Power Amplifier $749.99 Weighing in at a mere 13 pounds, The QSC PLX1104 is capable of up to an impressive 1,100 watts of power! The QSC PLX4 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX4 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX4 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. The compact 04 models (PLX1104, PLX1804) bring the same performance and technology, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg) these plug-and-play amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback. QSC PLX4 Series Features: Very light weight (13 lbs/5.9 kg) Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. Speakon NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers 21-position front-panel gain controls for precise, repeatable amplifier adjustment Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation Patented PowerLight power supply technology with other patents pending Value combined with uncompromised PLX technology, quality and performance for applications that don't require bridged or 2 ohm stereo operation Two models with power ratings up to 900 watts per channel @ 4 ohms Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overloads |
|
|
QSC PLX1804 Lightweight Power Amplifier $849.99 Capable of up to 1,800 watts of power while weighing a mere 13 pounds, the QSC PLX1804 is an impressive power amp! The compact 04 models (PLX1104, PLX1804) bring performance and technology, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg) these plug-and-play amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback. QSC PLX4 Series Features: Very light weight (13 pounds/5.9 kg) Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. Speakon NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers 21-position front-panel gain controls for precise, repeatable amplifier adjustment Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation Patented PowerLight power supply technology with other patents pending Value combined with uncompromised PLX technology, quality and performance for applications that don't require bridged or 2 ohm stereo operation Two models with power ratings up to 900 watts per channel @ 4 ohms Clip limiting protects speakers; thermal limiting maintains operation even during abnormal overloads |
|
|
QSC PLX2502 Lightweight Power Amplifier $1099.99 The PLX2502 Lightweight Power Amplifier from QSC is an impressive amp that's capable of up to 2,500 watts of power yet weighs a mere 21 pounds! The QSC PLX2502 is a premium quality, high-power amplifier designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, the PLX2502 amplifier combines light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, the PLX2502 amplifier is capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. Purchase a PLX Series Amplifier from AMS and Recieve QSC's after registering your product at QSC.com Two ways to get PLX2 performance The 02 models (PLX1802, PLX2502, PLX3102 and PLX3602) are the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. These models feature built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. QSC PLX2 Series Features: Very light weight (21 pounds/9.5 kg) Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators Speakon NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers 21-position front-panel gain controls for precise, repeatable amplifier adjustment Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation Patented PowerLight power supply technology with other patents pending Speakon NL4 and binding post outputs 100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage Switchable/defeatable clip limiters Four models with power ratings up to 1800 watts per channel @ 2 ohms, 3600 watts bridged @ 4 ohms Mechanical PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PL |
|
|
QSC GX5 Stereo Power Amplifier $399.99 The QSC GX5 Stereo Power Amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget. QSC designers, headed by Pat Quilter, have optimized output and appearance of the rackmountable GX5 while reducing raw material cost and weight. The GX5 power amplifier provides full performance for 500 watt (Program) speakers and supplies maximum possible power to 4 ohm and 8 ohm loads. Owners of popular 4 ohm loudspeakers (dual-woofer, two-way models and many subwoofers) will find the 700 watt (4 ohm) power of the GX5 an ideal match.The GX5 power amp uses a Class H system, based on key elements of the PLX Series, almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss.Power levels matched to the most popular speakers used by entertainersOptimized for maximum real-world headroom into 4Ω and 8Ω speaker systemsInputs: XLR, 1/4" TRS and phono input connectors for compatibility with any sourceOutputs: Speakonî combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems.Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racksLightweight less than 26 lbs (12.5 kg)Detented gain controls for precise setting and matching of sensitivityGuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the showFront panel LEDs monitor Power, Signal and ClippingSubwoofer/Satellite crossover built-in |
|
|
Qsc Gx5 Stereo Power Amplifier $399.99 The QSC GX5 Stereo Power Amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget. QSC designers, headed by Pat Quilter, have optimized output and appearance of the rackmountable GX5 while reducing raw material cost and weight. The GX5 power amplifier provides full performance for 500 watt (Program) speakers and supplies maximum possible power to 4 ohm and 8 ohm loads. Owners of popular 4 ohm loudspeakers (dual-woofer, two-way models and many subwoofers) will find the 700 watt (4 ohm) power of the GX5 an ideal match.The GX5 power amp uses a Class H system, based on key elements of the PLX Series, almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss.Power levels matched to the most popular speakers used by entertainersOptimized for maximum real-world headroom into 4Ω and 8Ω speaker systemsInputs: XLR, 1/4" TRS and phono input connectors for compatibility with any sourceOutputs: Speakon combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems.Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racksLightweight less than 26 lbs (12.5 kg)Detented gain controls for precise setting and matching of sensitivityGuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the showFront panel LEDs monitor Power, Signal and ClippingSubwoofer/Satellite crossover built-in |
|
|
QSC PLX3602 Lightweight Power Amplifier $1259.95 The QSC PLX3602 is capable of up to 3600 watts of power yet weighs a mere 21 pounds. The QSC PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. Two ways to get PLX2 performance The PLX 02 models (PLX1802, PLX2502, PLX3102 and PLX3602) are the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. These models feature built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. QSC PLX2 Series Features Compact light weight design (21 lbs/9.5 kg) Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged Front panel LED (power, clip, -10 dB, bridge/parallel and signal indicators Speakon NL4 and binding post outputs Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers 21-position front-panel gain controls for precise, repeatable amplifier adjustment Balanced XLR inputs with parallel TRS connectors (loop-through operation support) Patented PowerLight power supply technology with other patents pending 100 Hz high pass and low pass filters for bi-amping without an external crossover Switchable/defeatable 33 Hz infrasonic filters protect from over-excursion damage Switchable/defeatable clip limiters Power rating up to 3600 watts bridged @ 4 ohms Mechanical PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside, simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs/9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 60 energy pulses per second. The PowerLight supply delivers 100,000 pulses per second. More pulses make it easier to provide on-deman |
|
|
QSC PLX1104 Professional Power Amplifier $749.99 The compact PLX1104 power amplifier brings the same performance and technology as the rest of QSC's PLX2 Series to applications that don't require bridged or two-ohm operation. Designed to power one or two speakers from each amplifier channel (4-ohm minimum loading), the PLX1104 offers a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds, the plug-and-play PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.The PLX1104 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.550W/ch @ 4 ohms, 325W/ch @ 8 ohms.550W/ch @ 4 ohms, 325W/ch @ 8 ohmsVery lightweight (13 lbs.)Cooling design exhausts hot air out the front, keeping the rack coolFlow-through heatsinks require no filters that could become cloggedFront panel LED power, clip, -10 dB, and signal present indicators for systemmonitoring and troubleshootingSpeakon NL-4 output connectors provide a positive-locking speaker connectionCh 1 output uses all 4 wires for single-cable connection to bi-amplified speakers21-position front-panel gain controls for precise, repeatable amplifier adjustmentBalanced XLR inputs with parallel TRS connectors accommodate all commoninput connectors and support loop-through operationClip limiting protects speakers; thermal limiting maintains operation even duringabnormal overloads |
|
|
Qsc Plx1104 Professional Power Amplifier $749.99 The compact PLX1104 power amplifier brings the same performance and technology as the rest of QSC's PLX2 Series to applications that don't require bridged or two-ohm operation. Designed to power one or two speakers from each amplifier channel (4-ohm minimum loading), the PLX1104 offers a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds, the plug-and-play PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.The PLX1104 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.550W/ch @ 4 ohms, 325W/ch @ 8 ohms.550W/ch @ 4 ohms, 325W/ch @ 8 ohmsVery lightweight (13 lbs.)Cooling design exhausts hot air out the front, keeping the rack coolFlow-through heatsinks require no filters that could become cloggedFront panel LED power, clip, -10 dB, and signal present indicators for systemmonitoring and troubleshootingSpeakon NL-4 output connectors provide a positive-locking speaker connectionCh 1 output uses all 4 wires for single-cable connection to bi-amplified speakers21-position front-panel gain controls for precise, repeatable amplifier adjustmentBalanced XLR inputs with parallel TRS connectors accommodate all commoninput connectors and support loop-through operationClip limiting protects speakers; thermal limiting maintains operation even duringabnormal overloads |
| Account limit of 2104 requests per hour exceeded. |
QSC PLX Series Power Amps
Posted in Shure m44 7 | 
Tags: plx, psw, qsc, qsc plx, qsc plx 3402, qsc plx1804, qsc plx2502, qsc plx3102, qsc plx3602, qscplx, research, slutsteg