Industrial Turntable Design
November 13th, 2008
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Industrial Turntable Design
physics 45.5 rev/min into revs pers sec. i iforgot and i need to convert it thank you for your help?
this is the orginal problem.
You need to design an industrial turntable that is 59.5 cm in diameter and has a kinetic energy of 0.290 J when turning at 45.5 rpm (rev/min).
what is inertia.
physics
but ill figure it out with the conversion
SI units for omega is rad/s.
There are 2pi radians in 1 revolution and 60 seconds in a minute.
45.5 rev / min * 60 seconds / 1 min * 2pi rad / 1 rev = ________ rad/s.
And don't forget to change 59.5 cm to 0.595 m!
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
|
Industrial Age Gears Side Table $249 From the factory floor to your loft or contemporary home, this functional work of decorative art adopts vintage, industrial style to make a historical design statement. The stable bottom gear anchors a top gear capped with a 3/8"-thick, pencil-edged glass tabletop that allows admiration from any angle. Realistically crafted in engineered composite wood and hand-painted with an amazingly authentic faux metal finish, this is another quality Design Toscano exclusive. 24"dia.x24"H. 19 lbs. |
|
|
Stanton 680.V3 DJ Turntable Cartridge $199 A classic club cartridge with superior sound quality. The legendary 680.V3 cartridge is regarded as one of the best cartridges on the planet for mixing, club use, and scratching. The wide-band frequency response will give you high energy record playback and that extra punch you need to quake the dance floor whether playing dance or hip-hop. The 680.V3's suspension is designed to be very stable for those less than perfect club setups. The suspension is so robust that the 680.V3 functions just as good as a scratch needle as it does as a club needle. The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear flight-case. Stanton 630.V3 DJ Turntable Cartridge Features Best cartridge for scratching Extremely good low end response for club environments Very forgiving suspension design New industrial design Perfect for: Hip hop/Scratch DJs Club DJs |
|
|
Industrial Age Gears Wall Sculpture Set: Medium & Large $235 Alone or paired, both industrial age inspired gears are authentically created from the original designs, then crafted in lightweight but high quality engineered composite wood and hand-painted one piece at a time to be virtually indistinguishable from their actual heavyweight metal counterparts. These contemporary wall sculptures are Design Toscano exclusives. Medium: 20"dia. 3 lbs. Large: 39½"dia. 7 lbs. |
|
|
Numark V7 Motorized Turntable Software Controller $545.95 The Numark V7 Motorized Turntable Software Controller is the turntable for today's DJ. The V7 delivers outstanding feel and unprecedented power in a single-platter digital DJ controller. The Numark V7 is based around the acclaimed adjustable torque, motorized-platter design from Numark's NS7 turntable and delivers a host of professional features including real vinyl and a slipmat that analog turntablists will love, plus turntable control at 10 times the resolution of standard MIDIs, mouse-less library navigation, and Strip Search virtual-needle drop. The V7's linking function enables you to combine multiple V7 controllers with your choice of any mixer and your Mac or PC for a completely customizable, totally seamless performance environment.The Numark V7 software controller includes a professional 24-bit audio interface and contains premium faders, knobs, and buttons including controls for selecting tracks and blending audio effects in the included Serato ITCH software.Perfect feel:Forget your experiences with other controllers. The Numark V7 has a 7", motorized, high-torque aluminum turntable platter. The turntable offers both modern and classic settings that alter the feel to model the feel you prefer. A 7", legit vinyl record with 45rpm adapter sits on a real slipmat. There's no simulation herethe V7 is the real deal.Numark used nothing but premium, rugged, rubberized buttons and knobs for an unquestionably high-quality feel. Its recognizable, professional appearance is supported by a clean design in matte and glossy black. The V7 is housed in a heavy-gauge, industrial-strength metal casing that is ready for the torture of travel.Professional setup:Forget the mouse. Forget the keyboard. The Numark V7 controller renders software perfectly simple to operate, with its click knob and large, backlit buttons navigating though your music library. You'll spend less time looking at the screen and more time enjoying performing thanks to the visual feedback you get from the V7's extensive LEDs and hands-on controls.Grab a pair of V7s and your favorite mixer, such as the DXM PRO, and you're ready to rock. The Numark V7 controller has onboard audio outputs, so it's the only piece of gear you need to connect to a PA system or powered speakers. The front panel contains a mic input, an RCA line input, and both 1/4" and 1/8" headphone outputs with volume control.To complete your system, you can add-on Numark's Laptop Stand (sold separately; see item #583102) to elevate your computer to comfortable height. Numark's custom 7" Color Vinyl records (sold separately; see items #583098 and 583099) enable you to customize the look of V7 with eye-catching, translucent looks.Precision control:The V7 sends control information over USB at more than 10 times the standard MIDI rate. This innovative communication technique yields extremely high-precision, low-latency control.There's nothing like dropping the needle on a record for quickly locating a point in the track. Numar |
|
|
Used Numark V7 Motorized Turntable Software Controller $545.95 The Numark V7 Motorized Turntable Software Controller is the turntable for today's DJ. The V7 delivers outstanding feel and unprecedented power in a single-platter digital DJ controller. The Numark V7 is based around the acclaimed adjustable torque, motorized-platter design from Numark's NS7 turntable and delivers a host of professional features including real vinyl and a slipmat that analog turntablists will love, plus turntable control at 10 times the resolution of standard MIDIs, mouse-less library navigation, and Strip Search virtual-needle drop. The V7's linking function enables you to combine multiple V7 controllers with your choice of any mixer and your Mac or PC for a completely customizable, totally seamless performance environment.The Numark V7 software controller includes a professional 24-bit audio interface and contains premium faders, knobs, and buttons including controls for selecting tracks and blending audio effects in the included Serato ITCH software.Perfect feel:Forget your experiences with other controllers. The Numark V7 has a 7", motorized, high-torque aluminum turntable platter. The turntable offers both modern and classic settings that alter the feel to model the feel you prefer. A 7", legit vinyl record with 45rpm adapter sits on a real slipmat. There's no simulation herethe V7 is the real deal.Numark used nothing but premium, rugged, rubberized buttons and knobs for an unquestionably high-quality feel. Its recognizable, professional appearance is supported by a clean design in matte and glossy black. The V7 is housed in a heavy-gauge, industrial-strength metal casing that is ready for the torture of travel.Professional setup:Forget the mouse. Forget the keyboard. The Numark V7 controller renders software perfectly simple to operate, with its click knob and large, backlit buttons navigating though your music library. You'll spend less time looking at the screen and more time enjoying performing thanks to the visual feedback you get from the V7's extensive LEDs and hands-on controls.Grab a pair of V7s and your favorite mixer, such as the DXM PRO, and you're ready to rock. The Numark V7 controller has onboard audio outputs, so it's the only piece of gear you need to connect to a PA system or powered speakers. The front panel contains a mic input, an RCA line input, and both 1/4" and 1/8" headphone outputs with volume control.To complete your system, you can add-on Numark's Laptop Stand (sold separately; see item #583102) to elevate your computer to comfortable height. Numark's custom 7" Color Vinyl records (sold separately; see items #583098 and 583099) enable you to customize the look of V7 with eye-catching, translucent looks.Precision control:The V7 sends control information over USB at more than 10 times the standard MIDI rate. This innovative communication technique yields extremely high-precision, low-latency control.There's nothing like dropping the needle on a record for quickly locating a point in the track. Numar |
|
|
Shure Whitelabel DJ Turntable Cartridge $89.95 The Shure Whitelabel is designed for party and club DJs spinning everything from house and techno to trance, dance, and jungle. With a sleek and ergonomic design, the cartridge additionally delivers higher trackability, lower tone-arm resonance, and better skip resistance. It also includes an adjustable stylus overhang, reliable electrical contact, and improved stylus visibility. Whitelabel’s sonic characteristics include solid drop bass, flat mids, and accented highs, all tailored for the club environment. Shure phono cartridges are micro-manufactured, electro-mechanical devices that tell an entire audio system what's happening along the half-mile groove that's cut into the typical analog disc. The quality of the information provided by the cartridge determines how faithfully any audio system will reproduce the recorded sound. Skip Resistance: high Output: high Record Wear: very low Sound Emphasis: solid drop bass with detailed mids and highs Features The Design: Industrial, ergonomic, and plays to the cartridge's technological benefits of headshell mounted cartridges. Forward-Mass Design: Center of gravity is displaced closer to the cantilever for optimal performance. Forward-mass produces higher trackability, lower tone-arm resonance, better skip resistance and requires lower tracking forces. Adjustable overhang (50mm - 54mm): Unique to Shure products, adjustable overhang retains the forward and backward adjustment of a standard-mount headshell, providing maximum flexible adjustment between S-arm and straight-arm turntables. Electrical Contact: Engineered for optimized compatibility with most professional turntables, a rubber tension gasket and rounded gold plated pins limit possible damage caused by over-tightening cartridge to the tone-arm. Stylus Visibility: DJs can see exactly where they drop the needle. |
|
|
Stanton T52B DJ Turntable $149 The rugged Stanton T52 DJ turntable is a reliable belt drive turntable that is ideal for the novice to mid-level DJ. Simple to use but packed with great pro features, the T52 DJ turntable has a straight tone arm (for DJs who want to scratch) and also includes the versatile and popular Stanton 500.v3 cartridge, a professional quality slipmat for better control and a convenient cloth dust cover to protect the deck when it's not in action. Stanton T52 DJ Turntable Features Easy to Operate Belt Drive Turntable with Professional Features Sturdy Design with Comfortable and Practical Layout Straight Tone Arm Improves Tracking for Scratching Includes Quality Stanton 500.v3 Cartridge Pre-mounted on Headshell 2 Playback Speeds (33 or 45 RPM) 2 Start/Stop Switches for Mix or Battle Setup RCA Stereo Outputs Manual Pitch Control Fader (+/- 10% Adjustment) Accessories include RCA Cables, Slip Mat, and Dust Cover |
|
|
Stanton Turntable T 52B $149 Stanton Turntable T 52B The Stanton T.52B is a rugged and reliable belt-drive turntable perfect for everyday use and ideal for novice to mid-level DJs. Stanton builds the T.52B turntable so that it is simple to use but packed with great pro features. You get a manual pitch control fader and 2 Start/Stop switches for mix or battle setup. The Stanton T.52B turntable also has a straight tone arm—for DJs who want to scratch—and includes the versatile Stanton 500.v3 cartridge pre-mounted into the headshell. The T52.B turntable also has a professional quality slipmat for better control, and a convenient cloth dust cover to protect your deck when it's not in action. Features: Easy-to-operate belt-drive turntable with professional features Sturdy design with comfortable and practical layout Straight tone arm improves tracking for scratching Includes quality Stanton 500.v3 cartridge pre-mounted on headshell 2 playback speeds (33 or 45 RPM) 2 Start/Stop switches for mix or battle setup RCA stereo outputs Manual pitch control fader (+/- 10% Adjustment) Accessories include RCA cables, slipmat, and cloth dust cover Get Your Stanton Turntable T 52B Today! |
|
|
2 Tier Turntable by OXO $19.99 Turn a messy cabinet into an organized haven with the OXO Good Grips Two-Tier Turntable. The 10 inch Turntable is sized to fit inside most cabinets and provides easy access to hard-to-reach items like spices, condiments and other pantryware items that often get lost in the back on the cabinet. Simply open the latch to adjust the height of the top tier anytime. A second latch splits the top tier into two halves and makes room for taller items. With non-slip feet and a deep ledge, the Turntable keeps your items upright and in place. The innovative wide base design prevents the Turntable from interfering with nearby items or walls. This smooth spinning Turntable features long lasting and durable steel ball bearings.Features: • Multiple configurations maximize storage space • Top tier adjusts 2.5 inches in height and rotates 360 degrees • Top tier splits to accommodate items of all heights • Larger base prevents interference with surrounding items and walls • 10? Turntable is sized to fit inside cabinets and on countertops • Soft, non-slip edge for easy turning Size: 7 1/4"tall x 10"diameter |
|
|
16" Turntable by OXO $16.99 Find all your necessary pantry ware items with a quick spin of the OXO Good Grips 16" Turntable. The turntable provides easy access to hard-to-reach items like spices, sauces, cleaning products or tabletop accessories. It can be used on counter tops, tabletops and in cabinets. With non-slip feet and a deep ledge, the lazy susan keeps your items upright and in place. An innovative wide base design prevents the turntable from interfering with nearby items or walls as the top tray spins freely. This smooth spinning turntable features long lasting, durable steel ball bearings.Features: • Soft, non-slip lip for easy turning • Larger base prevents interference with nearby items • Deep ledge on platform helps keep items upright • Non-slip rubber feet protect all surfaces • Durable steel ball bearingsSize: 1 1/2"tall x 16"diameter |
|
|
11" Turntable by OXO $11.99 Find all your necessary pantry ware items with a quick spin of the OXO Good Grips 11" Turntable. The turntable provides easy access to hard-to-reach items like spices, sauces, cleaning products or tabletop accessories. It can be used on counter tops, tabletops and in cabinets. With non-slip feet and a deep ledge, the lazy susan keeps your items upright and in place. An innovative wide base design prevents the turntable from interfering with nearby items or walls as the top tray spins freely. This smooth spinning turntable features long lasting, durable steel ball bearings.Features: • Soft, non-slip lip for easy turning • Larger base prevents interference with nearby items • Deep ledge on platform helps keep items upright • Non-slip rubber feet protect all surfaces • Durable steel ball bearingsSize: 1 1/2"tall x 11"diameter |
|
|
Stanton T.52X Turntable $119 The Stanton T.52X is a rugged and reliable belt-drive turntable perfect for everyday use and ideal for novice to mid-level DJs. Stanton makes the T.52X turntable simple to use but has packed it with great pro features. The T.52 turntable has a straight tone arm (for DJs who want to scratch) and also includes a professional quality slipmat for better control. A convenient cloth dust cover protects your Stanton T.52X when it's not in action.Easy-to-operate belt-drive turntable with professional features Sturdy design with comfortable and practical layout Straight tone arm improves tracking for scratching 2 playback speeds (33 or 45 RPM) 2 Start/Stop switches for mix or battle setup RCA stereo outputs Manual pitch control fader (+/- 10% Adjustment) Accessories include RCA cables, slipmat, and cloth dust cover |
|
|
Stanton T.52X Turntable 886830342738 $59.5 The Stanton T.52X is a rugged and reliable belt-drive turntable perfect for everyday use and ideal for novice to mid-level DJs. Stanton makes the T.52X turntable simple to use but has packed it with great pro features. The T.52 turntable has a straight tone arm (for DJs who want to scratch) and also includes a professional quality slipmat for better control. A convenient cloth dust cover protects your Stanton T.52X when it's not in action.Easy-to-operate belt-drive turntable with professional features Sturdy design with comfortable and practical layout Straight tone arm improves tracking for scratching 2 playback speeds (33 or 45 RPM) 2 Start/Stop switches for mix or battle setup RCA stereo outputs Manual pitch control fader (+/- 10% Adjustment) Accessories include RCA cables, slipmat, and cloth dust cover |
 |
Crane CV1BLACK Standard Dj Laptop Stand - Black DJ Laptop Stand
List Price:  |
 |
Stanton 500.V3 500 V3 Cartridge (Single)
List Price: |
 |
Stanton 680E.V3 680 V3 Cartridge (Eliptical)
List Price: |
 |
Arduino and Kinect Projects: Design, Build, Blow Their Minds
List Price: |
 |
KAWS
List Price: |
Augmented Prototyping overview
Posted in Music Hall Turntable | 
Tags: audio, design, dj, industrial turntable design, music, technology, turntable design
ION IT21 Quick Play LP Converse Turntable with RCA Outputs –