Component Turntable
May 14th, 2010
 |
 |
MERRILL E.A.P ELECTRO MAGNETIC ABSORPTION PLATE TURNTABLES/COMPONENTS - WORKS |  |
 |
US $99.99 | 9d 22h 13m |
 |
Sony PS-LX220 Turntable Home Audio Music Stereo Component 2-Speed Record Player | |
|
US $28.99 | 9d 21h 46m |
 |
Fisher Audio Component System- Turntable MC-501 Needs New Belt- PLUS SPEAKERS!!! | |
|
US $60.00 | 1d 5h 39m |
 |
Sony component (home theater) w/ Technics Turntable - in original boxes | |
0 Bid | US $299.00 | 6d 5h 15m |
| Powered by phpBay Pro |
|
No items matching your keywords were found.
Component Turntable
Do I need power conditioning or anything similar?
I have a separate power line for my music system coming to my home. Everything is connected directly to it. The system is overall very quiet. No hums or buzzes. Not even a ground loop at high levels! The power too is very clean with nothing else on the power line.
Whenever I switch off any component using switches that I have put with the plug points, I get a pop sound from the speakers at times. (Sounds similar to the kind that used to occur in old turntables). How do I get rid of this ?
I am scared of frying my speakers with the square wave generated from this.
I would avoid using switched outlets. That's like turning off components by unplugging them. If you are going to do this, switch off the amps first and when powering up, switch the amps on last. Also do this when using the components on power switches. If your components have 12 volt triggers, use those. With this you can just turn off your preamp/receiver and have the triggers turn off everything else.
As for power conditioning I never had any luck with it. In the past I had a couple systems with a slight hum so I tried some different line conditioners. Every one just made the hum worse. My current HT uses its own dedicated circuit like you and I have no problems. My processor turns on/off all the amps with the 12 volt trigger and I never get pops.
|
|
MERRILL E.A.P ELECTRO MAGNETIC ABSORPTION PLATE TURNTABLES/COMPONENTS - WORKS | |
|
US $99.99 | 9d 22h 13m |
|
Sony PS-LX220 Turntable Home Audio Music Stereo Component 2-Speed Record Player | |
|
US $28.99 | 9d 21h 46m |
|
Fisher Audio Component System- Turntable MC-501 Needs New Belt- PLUS SPEAKERS!!! | |
|
US $60.00 | 1d 5h 39m |
|
Sony component (home theater) w/ Technics Turntable - in original boxes | |
0 Bid | US $299.00 | 6d 5h 15m |
| Powered by phpBay Pro |
|
No items matching your keywords were found.
|
 |
MCS Modular Component Systems Direct Drive Automatic Turntable Model No 683-6601 | |
|
US $100.00 | 22d 7h 24m |
 |
MCS 6710 Fully Automatic Belt Drive Multiplay Turntable Modular Component System | |
|
US $69.99 | 17d 5h 51m |
 |
Dual Components Catalog 1970 Amps, Tuners, Turntables | |
|
US $24.95 | 10h 34m |
 |
Vintage 1980's MCS Modular Component Systems Stereo Turntable 6601 Direct Drive | |
0 Bid | US $24.99 | 1d 7h 49m |
| Powered by phpBay Pro |
|
No items matching your keywords were found.
|
|
Numark Turntable Dust Cover $39.95 Numark's dust cover was designed specifically for their turntables and provides a custom-tailored fit and classy appearance with sleek lines and a slight ultraviolet tint. Far from a simple cosmetic accessory, dust cover is a crucial component of any serious turntablist's arsenal of DJ equipment, protecting both the turntable and vinyl records that are spinning.Dust cover has a specially designed cutaway for the tone-arm counterweight so that records can play unobstructed, edge to center, with the dust cover in place, doing it's thing. Strategically located rubber feet ensure that the Numark dust cover can be placed on a working turntable, minimizing noise and functioning as a diffraction eliminator. It was designed with the real world in mind and is constructed of shatter and scratch-resistant polycarbonate.Universal design fits nearly all Numark turntablesSlight ultraviolet tint protects vinyl from sun damageRobust polycarbonate constructionShatter and scratch-resistantTone-arm counterweight cutaway permits playback with cover in placeStrategically located rubber feet minimize noise and eliminate diffractionDUST COVER fits Numark's TTUSB, TTi, TTX, TTXUSB, TT500, TT200, TT1650, TT1625, TT1610, TT1600, and TT1550 turntables. |
|
|
Turntable Matinee $10.49 Turntable Matinee |
|
|
Turntable Technology $9.49 Turntable Technology |
|
|
Merryweather Turntable $39.99 Merryweather Turntable - Giclee Print |
|
|
Railway Turntable $24.99 Railway Turntable - Photographic Print |
|
|
Train Turntable $24.99 Train Turntable - Photographic Print |
|
|
Turntable, Retro $24.99 Turntable, Retro - Premium Poster |
|
|
Turntable Line $24.99 Turntable Line - Photographic Print |
|
|
Professional Manual Turntable $73.94 PYLE TURNTABLE |
|
|
DUST COVER Turntable Dust Cover $29 DUST COVER is designed specifically for Numark turntables and provides a custom-tailored fit and classy appearance with sleek lines and a slight ultraviolet tint. Far from a simple cosmetic accessory, DUST COVER is a crucial component of any serious turntablist’s arsenal of equipment, protecting both turntables and vinyl records. |
|
|
Metallic Turntable $551 Metallic Turntable - Made of: Chinese Oak -Handcrafted |
|
|
Turntable I $17.99 Renee Stramel Turntable I - Art Print |
|
|
Turntable III $17.99 Renee Stramel Turntable III - Art Print |
|
|
Turntable IV $17.99 Renee Stramel Turntable IV - Art Print |
|
|
Turntable II $17.99 Renee Stramel Turntable II - Art Print |
|
|
Cuisinart Turntable Ring $8 Turntable Ring for CMW-55BC |
| Account limit of 2098 requests per hour exceeded. |
Fisher Audio Component System Turntable/Dual Cassette for sale on eBay
Stereo receiver compatibility with "phono" hook-up?
I have a tradtional stereo componet system comprised of receiver, cd, tape and PHONO. My existing malfunctioning receiver has a specific port and switch for Phono however other than the higher priced ones, the new receivers do not have the phono port and phono selector. I need a new receiver and was told that the cd and tape components can be used or connected interchangeably in the receiver ports/channels however there is something inherently different regarding the phono compatibility and hook-up. There for I cannot attach the phono leads to, say, the aux or dvd receiver port whereby the cd and tape would work. Is it true that I specifically need a PHONO port on the receiver, which is rare today, for the turntable to work? Or is it compatible with the existing hookup ports, ie dvd, aux? Does the turntable specifically need the "phono" switch and phono port or can I use the dvd, tv or aux? Thank you, heinz
no, your phonograph, or turntable, will work with any auxillery inputs.
Posted in 
Tags: